Hand-washing basin

» manufactured from stainless steel material no. 1.4301	» Delivery includes: wall mounting rails, tap outlet and
» with basin lining on three sides, matt ground finish,	stopper valve 1 1/2"
grain 240	» Delivery comes without a siphon
» deep-drawn weld-in sink with a smooth surface	» An optimal water flow can be reached at a water pressure
	between 2 and 4 bar

Available in 4 design options:

Knee-operated sink: Sink is operated by pressing against the front panel behind which a self-closing valve is installed. With premixer for pre-setting the temperature, connection 3/8"	Optical Sensor: Sink is operated without contact by an optical sensor built into the front panel which controls a 230 V solenoid valve. Sink is fully wired on delivery. Premi- xer for pre-setting the temperature, connection 3/8"
Optical sensor and continuous flow heater: Sink is operated without contact by an optical sensor built into the front paenl which controls a 230 V solenoid valve. The additional built-in continuous flow heater has a connection load of 230V, the power consumption is 3,5 kW, connection 3/8". Sink is fully wired on delivery.	Optoelectronic sensor tap: Sink is operated without contact by an optoelectric sensor built into the outlet tap with a connection load of 230 V, operating voltage 6 V and additonally 4 1.5 V AA batteries, premixer for pre-setting temperature, connection 3/8"

Fig.	Item no.	Dimensions in mm WxDxH	Basin measurements in mm WxDxH	Model
1	5330100	400x310x240	325x230x130	Knee-operated
2	5330500	400x310x240	325x230x130	Optical sensor
3	5330500-OPT	400x310x240	325x230x130	Optoelectronic sensor tap

	5310100-N	470x410x240	370x340x175	Knee-operated
	5310500-N	470x410x240	370x340x175	Optical sensor
	5350500	470x410x240	370x340x175	Optical sensor / continuous flow heater
	5310500-OPT-N	470x410x240	370x340x175	Optoelectronic sensor tap

	5320100	550x450x270	500x310x150	Knee-operated
	5320600	550x450x270	500x310x150	Optical sensor
	5320600-OPT	550x450x270	500x310x150	Optoelectronic sensor tap